Godex International Co. Ltd. 6PDL7 Manuel D’Utilisation
4-2. Cutter Operation
The cutter module is a factory default accessory, hence it is necessary to open the cutter module
in some printer operations, such as loading the label or ribbon. To open the cutter module,
please press the Cutter Hook and flip the cutter downward as shown in below figure.
in some printer operations, such as loading the label or ribbon. To open the cutter module,
please press the Cutter Hook and flip the cutter downward as shown in below figure.
【
Caution
】
Although essential precautions have been adopted for the protection, it is still
necessary to be careful when touching, installing, removing, operating and cleaning the cutter
module.
module.
The cutter module of DuraLabel 7000 can be not only controlled by printer commands but also
can be operated through the LCD panel. The description of cutter function on LCD panel is as
follow:
FEED
PAUSE
CANCEL
Press the
CANCEL key when printer is
on Standby Mode, the printer will then enter
into Cutter Mode. When on the Cutter Mode,
the cutter will cut once for each time the
into Cutter Mode. When on the Cutter Mode,
the cutter will cut once for each time the
FEED key is pressed.
【Note】To avoid the unexpected danger,
please do not open the cutter module when
printer is on Cutter Mode.
please do not open the cutter module when
printer is on Cutter Mode.
DuraLabel 7000 User’s Manual
31