CyberPower RMCARD202 Manuel D’Utilisation

 

 

 PowerPanel™ Business Edition 

 

 

 

 

 

 

 

 

 

 

 

       42    

The administrator can be notified when an event occurs. See Event Action/Notification Recipient page for 

more details about the notification methods and recipient assignment.  

z  Initiated: Determines whether to send a notification or not and sets the notification delay. If the event is 

cleared within the notification delay, the notification of the occurrence and the event cleared notification 

will not be sent.   

z  Repeat: Determines whether to send one additional notification after the initial notification.  Only events 

which are of severe-level and warning-level type support a repeat notification. 

A command will be executed when an event occurs.  

z  Initiated: Determines whether to execute a command and sets the delay for the command execution. If 

the event is cleared within the command execution delay, the command for this event and the 

corresponding event will not be executed.  

z  Duration: Sets the estimated time for the command to complete. If the event requires the computer to 

shut down, this delay provides time for commands and scripted actions to complete before the shutdown 

is initiated.  

z  File: Sets a command file to be executed when an event occurs. Shell scripts for the command file uses 

"cmd" as the filename extension. For more information about shell scripts read the detailed description in 

the "default.cmd" file in the "extcmd" folder in the PowerPanel

®

 Business Edition installation directory. 

Customized shell scripts must be saved in the "extcmd" folder in the PowerPanel Business Edition 

installation directory. The command file will be listed on the Command/File list and can be executed 

actually when the power event occurs. 

Initiate a shutdown sequence when an event occurs. A shutdown sequence is only initiated by events which 

are of severe-level and warning-level type.  

z  Initiated: Determines whether to request the computer to be shut down and the delay before initiating 

the shutdown sequence. The shutdown will be canceled if the event is cleared during this delay time. The 

minimum delay time to initiate shut down is based on the time set for the execution of the other actions to 

complete. This includes the notify delay time, command delay time and command execution time.