CyberPower RMCARD202 Manuel D’Utilisation

PowerPanel™ Business Edition

This feature is used to apply identical settings to the particular event within the same category (Severe,

Warning, and Information). Once the As field of one event have been assigned, the settings of this event will

use the assigned event’s settings. The settings of this event will match with an assigned event’s.

The settings of UPS is faulty event would be applied with the settings of the Battery capacity is critically low event.

Event List

The Event List displays power events. The events displayed varies depending on whether they are listed in

Agent or Client and which UPS or PDU is providing the events.

z Battery capacity is critically low - Battery capacity is critically low; the battery power could be lost

immediately.

z Local communication lost in a power event - Communication with device has been lost when meets a

power event.

Communication between the Agent and the UPS using the USB or serial cable has been lost during a

power failure.

z UPS is faulty - UPS has malfunctioned, it could not work normally.

z Communication cannot establish - Communication failed to establish during startup.

The Agent cannot establish communication with the UPS via USB or serial port, or the established

communication has been interrupted.

z Local communication lost - Local communication with the UPS has been lost.

Local communication means the USB or serial connection between the Agent computer and UPS.

z Batteries are not present - Batteries are not present, the UPS cannot provide battery power in this

condition.

z Bypass is overloaded - Output is overloaded in bypass mode.

z Output is overloaded - Output is overloaded, power may no longer be supplied.

The power consumption of the connected equipment exceeds the maximum load rating of the UPS. The

UPS may not continue to provide power if the overload condition is sustained.

z Available runtime is insufficient - Available runtime can't afford a complete shutdown even battery has

fully recharged.

This event will occur if the UPS has insufficient runtime for the Agent computer and all Client computers

to shutdown completely even the batteries have fully charged. The excessive load or the shutdown time