Wilson Electronics LLC 2B1225 Manuel D’Utilisation
1
2
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com Hours: 7 am to 6 pm MST.
Select a location to install the signal booster that is away from excessive heat, direct
1 .
sunlight, moisture and that has proper ventilation . Do not place the signal booster in
an air-tight enclosure .
Select a location on the top of the structure to install the outside antenna . Use a cell phone
Select a location on the top of the structure to install the outside antenna . Use a cell phone
2 .
in test mode to find the strongest signal from the cell tower . Visit
www.WilsonElectronics.com to find test mode function for your particular cell phone .
Run the outside antenna cable to the signal booster and attach it to the connector
Run the outside antenna cable to the signal booster and attach it to the connector
3 .
labeled “outside antenna .”
An external adapter is required to connect the cell phone or cellular data card to the
An external adapter is required to connect the cell phone or cellular data card to the
4 .
signal booster . The external adapter plugs into the included antenna extension cable
and directly into a socket on the cell phone or cellular data card . Run the extension
cable from the external adapter and attach it to the connector labeled “cellular phone
or data card” on the signal booster .
Note: Be careful when plugging the connector in so as not to bend the center pins on
the connectors. Ensure all cables have a tight connection.
Before powering up the signal booster verify that both the outside antenna and the
Before powering up the signal booster verify that both the outside antenna and the
5 .
inside antenna are connected and check that all connections are tight . An AC surge
protector is recommended for all installations .
Quick Installation Overview
The following steps provide a summary of the signal booster/antenna installation process .
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 .
Cellular
Modem
Power
Supply
Antenna
Signal
Booster
Installation Diagram
(Figure 1)
AC Surge
Protector