SendFar Technology Co. Ltd. OAB-03001 Manuel D’Utilisation
Chapter 3. Network Topologies
This section describes several main types of installations commonly
implemented using the Outdoor Wireless System. This is by no means
intended to be an exhaustive list of all possible configurations, but rather
shows examples of some of the more common implementations. The SF-
3000 can only be configured into Wireless Client Router/Bridge to
accomplish the broadband wireless point-to-point, point-to-multipoint
systems (as shown in following figuration).
implemented using the Outdoor Wireless System. This is by no means
intended to be an exhaustive list of all possible configurations, but rather
shows examples of some of the more common implementations. The SF-
3000 can only be configured into Wireless Client Router/Bridge to
accomplish the broadband wireless point-to-point, point-to-multipoint
systems (as shown in following figuration).
Note : Remember to press “
R
” to reboot the system after you upload
the configuration file to the SF-3000.
The SF-3000 can performed in router or bridge modes. In a Point-to-
Multipoint topology, all communication between network systems is done
through a centralized agent. In the Outdoor Wireless Router/Bridge product,
the centralized agent is Central Router or Central Bridge and the individual
network notes may be Wireless Client Router or Bridge.
To show some possibilities of Point-to-Multipoint topologies, the following
examples are provided:
1. Wireless Access Bridge-to-Central Wireless Bridge
2. Wireless Client Router-to-Central Wireless Bridge
3. Wireless Access Bridge-to-Central Wireless Router
4. Wireless Client Router-to-Central Wireless Router
examples are provided:
1. Wireless Access Bridge-to-Central Wireless Bridge
2. Wireless Client Router-to-Central Wireless Bridge
3. Wireless Access Bridge-to-Central Wireless Router
4. Wireless Client Router-to-Central Wireless Router
Version 1.00
18
Version 1.00
19