SendFar Technology Co. Ltd. OAB-03001 Manuel D’Utilisation

The IP Configuration method is different in each Operating Mode. And you 
can refer to following descriptions to know the details: 
 

 
Select the Wireless Access Bridge mode, and then enter the IP Address 
manually into the Bridge IP Address field. 
 
- Bridge IP Address  
Use this setting to assign or change the bridge’s IP address.

 

After that, click FINISH at the bottom of this page to complete the 
modification of IP address. 
 

 
In this mode, you can assign an Wireless and Ethernet IP address to the 
SF-3000 manually. 
 
- NAPT 
This function allows home users and small businesses to connect their 
network to the Internet cheaply and efficiently. You have to Enable it to 
allow the subscribers to connect to the Internet in this mode.

After that, click FINISH at the bottom of this page to complete the IP 
address modifications. 

Sometimes, the operator can expose the internal servers on the local 
intranet to the public Internet. For this, you must create the Virtual Server 
Mapping for these invisible internal servers. 
 
Select the “/General Config/ TCP/IP/Virtual Server”, and then the Virtual 
Server screen appears.  The following figure shows the current virtual 
server entry table. (Default Virtual Server Mapping pool is empty) 
 

Version 1.00 

- Service Name  

25

 

1. Click 

 Add , the Virtual Server Entry Edit page appears as following 

figure. 

 

2.  To edit the Virtual Server Entry, specify all the entry fields to allow 

Internet user to access the Internal servers.  

Version 1.00 

24