SendFar Technology Co. Ltd. OAB-03001 Manuel D’Utilisation

Alias name of this internal server, such as FTP. 

Version 1.00 

27

- Access Interface  

Indicate the translation occurs on which interface (Wireless interface / 
Ethernet interface), such as Ethernet. 

- Protocol  

Indicate which protocol (TCP/UDP) you want to translate from outside to 
internal server, such as TCP. 

Public Access Port number: Indicate which socket port (1 ~ 65535) you 
want to translate from outside to internal server, such as 21. 

Virtual Server IP address: Specify the private IP address of the internal 
server, such as 192.168.1.100. 

Virtual Server Port number: Specify the socket port (1 ~ 65535) of the 
internal server, such as 21. 

 

3. Click 

 OK . The Virtual Server Entry Table appears with the entries list. 

4.  To modify or delete a virtual server entry, click the select button beside 

the entry index number and click  Modify  or  Delete .  

The SNMP Community Pool has five entries.   

1. 

To modify a entry, click the select button beside the entry index 
number and then click  Modify , the configuration page appears as 
following figure. 

5.  To add another entry to the Virtual Server Mapping Pool, repeat step 1 

through step 3. 

1. 

When you have included all the entries you need, click  FINISH .  

Select the “/General Config/ TCP/IP/SNMP”, and then the SNMP screen 
appears. The following figure shows the current SNMP community pool and 
trap host pool. 
 

 

Version 1.00 

26