Manualsbrain.com
  1. Manuels
  2. Marques
  3. Wacom
  4. DTK-1300
  5. Manuel D’Utilisation

Wacom DTK-1300 Manuel D’Utilisation

Télécharger
Page de 82
Contents
Index
Contents
54
Index
54
TESTING THE EXPRESSKEYS, ROCKER RING AND HOME BUTTON
1. With the D
IAGNOSTICS
 dialog box open, observe the T
ABLET
 I
NFO
 column as you test each ExpressKey or 
Rocker ring position. Be sure to select the pen display you are testing from the T
ABLET
 I
NFO
 column.
2. Test the ExpressKeys, Rocker ring positions or Home button by pressing them one at a time. Each time 
you press a key, position or button, its number is shown next to either the L
EFT
 B
UTTONS
 or R
IGHT
 
B
UTTONS
 category, depending on which key or position you are testing.
3. When you are done, click the 
C
LOSE
 button to exit the dialog box.
Important: Some applications can override and control the ExpressKey or Rocker ring functions. 
Consider closing any open applications except the Wacom Tablet control panel when testing the 
ExpressKeys or Rocker ring. For details, see 
TESTING A PEN
1. With the D
IAGNOSTICS
 dialog box open, and while observing the P
OINTING
 D
EVICE
 I
NFO
 column, bring 
your pen within 5 mm (0.2 inch) of the screen. A value for P
ROXIMITY
, the D
EVICE
 N
AME
, D
EVICE
 T
YPE
, and 
a D
EVICE
 S/N (serial number) should be displayed. Be sure to select the pen display you are testing from 
the T
ABLET
 I
NFO
 column.
2. Move your tool along the pen screen surface. The X and Y D
ATA
 values should change to reflect the tool 
position.
3. Test your pen switches. The Cintiq status LED should light white each time you click with the tool tip, 
press the side switch, or press the tool eraser to the screen.
•
Press on the screen surface with the tool tip. The S
WITCHES
 state and P
RESSURE
 value should 
change. P
RESSURE
 should change from approximately 0% with no pressure applied to 
approximately 100% when full pressure is applied.
•
Next, press the side switch without pressing the tip to the tablet. The S
WITCHES
 state should 
change. For the Grip Pen, do this for both positions of the switch. 
•
Press the eraser to the screen. The S
WITCHES
 state and P
RESSURE
 value should change. P
RESSURE
 
should change from approximately 0% with no pressure applied to approximately 100% when full 
pressure is applied.
•
For the optional Airbrush, move the fingerwheel forward. The W
HEEL
 value should decrease to a 
value of approximately 0 when the fingerwheel is all the way forward. Move the fingerwheel 
backward. The W
HEEL
 value should increase to approximately 1000 when the fingerwheel is all the 
way back.
Pen
S
WITCHES
 states
Tip = 1
Side switch (lower position) = 2
Side switch (upper position) = 3
Eraser = 1
Airbrush
S
WITCHES
 states
Tip = 1
Side switch = 2
Eraser = 1