ZyXEL Communications Corporation AMG1302 Manuel D’Utilisation
AMG1302-T10A User’s Guide
227
C
H A P T E R
2 4
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•
•
•
24.1 Power, Hardware Connections, and LEDs
The Device does not turn on. None of the LEDs turn on.
1
Make sure the Device is turned on.
2
Make sure you are using the power adaptor or cord included with the Device.
3
Make sure the power adaptor or cord is connected to the Device and plugged in to an appropriate
power source. Make sure the power source is turned on.
4
Turn the Device off and on.
5
If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See
.
2
Check the hardware connections.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4
Turn the Device off and on.
5
If the problem continues, contact the vendor.