ZyXEL Communications Corporation EMG6765-Q10A Manuel D’Utilisation
Chapter 9 Wireless LAN
EMG6765-Q10A User’s Guide
73
9.1.1 What You Can Do
• Use the General screen to turn the wireless connection on or off, set up wireless security between the
EMG6765-Q10A and the wireless clients, and make other basic configuration changes (
).
• Use the More AP screen to set up multiple wireless networks on your EMG6765-Q10A (
).
• Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from
connecting to the EMG6765-Q10A (
• Use the Advanced screen to allow intra-BSS networking and set the RTS/CTS Threshold (
).
• Use the QoS screen to ensure Quality of Service (QoS) in your wireless network (
).
• Use the WPS screen to quickly set up a wireless network with strong security, without having to
configure security settings manually (
• Use the WPS Station screen to add a wireless station using WPS (
• Use the Scheduling screen to set the times your wireless LAN is turned on and off (
).
• Use the Airtime Management screen to assign available airtime and bandwidth to interfaces and
hosts (
).
9.1.2 What You Should Know
Every wireless network must follow these basic guidelines.
• Every wireless client in the same wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set IDentity.
• If two wireless networks overlap, they should use different channels.
Like radio stations or television channels, each wireless network uses a specific channel, or frequency,
to send and receive information.
• Every wireless client in the same wireless network must use security compatible with the AP.
Security stops unauthorized devices from using the wireless network. It can also protect the
information that is sent in the wireless network.
Wireless Security Overview
The following sections introduce different types of wireless security you can set up in the wireless
network.
network.
SSID
Normally, the AP acts like a beacon and regularly broadcasts the SSID in the area. You can hide the
SSID instead, in which case the AP does not broadcast the SSID. In addition, you should change the
default SSID to something that is difficult to guess.
SSID instead, in which case the AP does not broadcast the SSID. In addition, you should change the
default SSID to something that is difficult to guess.
This type of security is fairly weak, however, because there are ways for unauthorized devices to get the
SSID. In addition, unauthorized devices can still see the information that is sent in the wireless network.
SSID. In addition, unauthorized devices can still see the information that is sent in the wireless network.