ZyXEL Communications Corporation VSG1435B101 Manuel D’Utilisation

 Chapter 7 Wireless

VSG1435-B101 Series User’s Guide

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) 
on the ZyXEL Device.

Click Network Settings > Wireless > More AP. The following screen displays.

Figure 29   Network Settings > Wireless > More AP

The following table describes the labels in this screen.

Encryption

Select the encryption type (AES or TKIP+AES) for data encryption.

Select AES if your wireless clients can all use AES.

Select TKIP+AES to allow the wireless clients to use either TKIP or 
AES.

WPA2 Pre-
Authentication

This field is available only when you select WPA2.

Pre-authentication enables fast roaming by allowing the wireless client 
(already connecting to an AP) to perform IEEE 802.1x authentication 
with another AP before connecting to it. Select Enabled to turn on 
preauthentication in WAP2. Otherwise, select Disabled.

Network Re-auth 
Interval

Specify how often wireless stations have to resend usernames and 
passwords in order to stay connected.

If wireless station authentication is done using a RADIUS server, 
the reauthentication timer on the RADIUS server has priority.

Group Key 
Update Timer

The Group Key Update Timer is the rate at which the RADIUS server 
sends a new group key out to all clients. 

Table 13   Wireless > General: More Secure: WPA(2)

Table 14   Network Settings > Wireless > More AP

#

This is the index number of the entry. 

Status

This field indicates whether this SSID is active. A yellow bulb signifies 
that this SSID is active. A gray bulb signifies that this SSID is not active.