ZyXEL Communications Corporation VSG1435B101 Manuel D’Utilisation

 Chapter 7 Wireless

VSG1435-B101 Series User’s Guide

This screen allows you to configure the ZyXEL Device to give exclusive access to 
specific devices (Allow) or exclude specific devices from accessing the ZyXEL 
Device (Deny). Every Ethernet device has a unique MAC (Media Access Control) 
address. The MAC address is assigned at the factory and consists of six pairs of 
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the 
MAC addresses of the devices to configure this screen.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame 
so a station cannot obtain the SSID through scanning using a site 
survey tool.

Client Isolation 

Select this to keep the wireless clients in this SSID from 
communicating with each other.

MBSSID/LAN 
Isolation 

Select this to keep the wireless clients in this SSID from 
communicating with clients in other SSIDs or LAN devices.

Enhanced Multicast 
Forwarding 

Select this check box to allow the ZyXEL Device to convert wireless 
multicast traffic into wireless unicast traffic.

Security Level
Security Mode

Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to 
add security on this wireless network. The wireless clients which 
want to associate to this network must have same wireless security 
settings as the ZyXEL Device. After you select to use a security, 
additional options appears in this screen.  

Or you can select No Security to allow any client to associate this 
network without any data encryption or authentication.

See 

 for more details about this field.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to exit this screen without saving.

Table 15   More AP: Edit