ZyXEL Communications Corporation WAP7205 Manuel D’Utilisation

 Chapter 11 Troubleshooting

WAP7205 User’s Guide

I cannot access the Internet.

Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick 
Start Guide.

Try to connect directly to the gateway. If you can access the Internet, check that the WAP7205 has 
connected to the gateway by checking the Status screen. See 

If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless client are 
the same as the settings in the WAP7205.

Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again. 

If the problem continues, contact the network administrator or vendor.

I cannot access the Internet anymore. I had access to the Internet (with the WAP7205), but my 

Internet connection is not available anymore.

Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick 
Start Guide and 

Reboot the WAP7205.

Try to connect directly to the gateway. If you can access the Internet, check that the WAP7205 has 
connected to the gateway by checking the Status screen. See 

If the problem continues, contact the network administrator or vendor. 

The Internet connection is slow or intermittent.

There might be a lot of traffic on the network. Look at the LEDs, and check 

. If the 

WAP7205 is sending or receiving a lot of information, try closing some programs that use the Internet, 
especially peer-to-peer applications.

Check the signal strength. If the signal strength is low, try moving the WAP7205 closer to the AP if 
possible, and look around to see if there are any devices that might be interfering with the wireless 
network (for example, microwaves, other wireless networks, and so on).

Reboot the WAP7205.

If the problem continues, contact the network administrator or vendor, or try one of the advanced 
suggestions.