Innovative Control Systems Inc IGWT-660098 Manuel D’Utilisation
13-2 Timer LC 1200 Manual
Wiring
You will need 22-gauge, 4-conductor plenum-
rated cable for this connection.
rated cable for this connection.
To wire the Timer to the LC unit, refer to Figure
13.2 and use the following instructions:
13.2 and use the following instructions:
1. Using the BLACK wire, connect the “-“
pin of the Timer to P3-pin5 (Ground) of
the LC unit.
the LC unit.
2. Using the RED wire, connect the “+”
pin of the Timer to P3-pin4 (+12V) of
the LC unit.
the LC unit.
3. Using the WHITE wire, connect the
“N.O” pin of the Timer to P1-pin2
(Perimeter In) of the LC unit.
(Perimeter In) of the LC unit.
4. Using the GREEN wire, connect the
“C” pin of the Timer to P1-pin1
(Perimeter Out) of the LC unit.
(Perimeter Out) of the LC unit.
Figure 13.2 Wiring the Timer