Innovative Control Systems Inc IGWT-660098 Manuel D’Utilisation

  Setting the Time 
  Programming for a Day and Time 
  Programming for all Week 
  Setting ON/OFF times 

PLEASE NOTE:  

consult the manufacturer’s manual. 

Programming the Timer requires you to set 
event times and whether to turn the system on or 
off at those times.  

To set the Timer time, refer to Figure 13.2 and 
use the following instructions: 

1.  Activate the Memory Backup Battery by 

switching mode set dipswitch 1 to ON. 

 The LCD will come on flashing 

displaying: Off 00:00 

2.  Apply system power to the FT-100 unit. 

3. Press 

and 

hold the “clock” button. 

4.  To set hours, use the button marked 

“h+”. 

5.  To set minutes, use the button marked 

“m+”. 

6.  To set day of the week, use the button 

marked “Day”. 

7.  Release the “clock” button. 

To program an ON or OFF instruction for a 
particular day and time, refer to Figure 13.1 and 
use the following instructions: 

1.  Select the desired timer (1 thru 6 ON; 1 

thru 6 OFF) using the “Timer” button. 

2.  Program the desired time and day using 

the “h+”, “m+” and “Day” buttons. 

3.  Press and release the “clock” button to 

exit the program mode. 

To program an ON or OFF instruction for all 
week, refer to Figure 13.1 and use the following 
instructions: 

1.  Select the desired timer (1 thru 6 ON; 1 

thru 6 OFF) using the “Timer” button. 

2.  Program the desired time using the “h+” 

and “m+” buttons. 

3.  Press and release the “clock” button to 

exit the program mode. 

To set ON/OFF times for predetermined timer 
events, refer to Figure 13.1 and use the 
following instructions: 

1.  To enter the program mode, press and 

release the button marked “Timer” once. 

 The LCD will show: 

Timer 1 ON --:-- 

2.  Pressing the “Timer” button a second 

time will set the unit to OFF timer 1. 

 This sequence will continue for 

6 ON timers and 6 OFF timers for a total 
of 12 timers.  

3.  Press and release the “clock” button to 

exit the program mode.