Innovative Control Systems Inc IGWT-660098 Manuel D’Utilisation

LC 1200 Manual                                                                                System Maintenance & Testing 15-1 

  Tag and Band maintenance 
  LC units 

 

Testing monitored zones

 

 

PLEASE NOTE: 

For information on cleaning Tag and Bands, see 
page 3-2. 

For information of testing a Tag’s functionality 
or a Tag’s battery life, see page 3-5. 

LC unit covers can be cleaned with antibacterial 
wipes or hydrogen peroxide. 

 

Zone Functions Tested 

 

Test Equipment Required 

 

Zone, Lock Test 

 

Zone, Egress Test 
(3000 and 3101 Magnetic Locks) 

 

Zone, Delayed Egress Test 
(3101 Magnetic Locks only) 

 

Zone, Hallway Test 

 

Zone, Elevator Deactivation Test 

 

Zone, Automatic Door Deactivation Test 

 

Fire Panel Interface (FPI) Test 

Note: These tests should only be performed by 
trained personnel.  

This document defines the recommended 
periodic testing procedures for the Accutech 
security systems. Accutech recommends that 
these tests be performed (at the minimum) on a 
monthly basis. 

Periodic testing of these critical performance 
functions can help prevent undetected security 
system failures.   

Accutech systems respond to RF signals 
generated by the Tags. Most conditions occur at 
a monitored zone. 

Each exit point around the area of protection 
should be evaluated to determine: 

  if doors lock and/or elevators disable when 

a Tag approaches 

  if alarms are generated due to passage of a 

Tag through an exit point 

You will need to designate Tags to be used 
solely for testing purposes only and a TAD.