Teledesign Systems Inc TS4000EH Manuel D’Utilisation

 
AirTest is Teledesign’s general purpose wireless modem test software.  AirTest 
can send data and gather performance statistics about the link between multiple 
modems.   
 
AirTest is modem independent and can be used with any asynchronous serial 
communications device.   
 
To start AirTest press the AirTest button on the main screen of the configuration 
program.  For details on using AirTest consult AirTest’s on line help. 
 

 

 
 
To test the operation of the TS4000, AirTest can be used to pass data between 
two modems.   
 
1)  Attach two TS4000s each to a PC serial port. 

2)  Configure AirTest for serial port settings (baud rate, data bits and parity) that 

match the attached TS4000’s settings (Setup Manu – Port Setup). 

3)  Transmit data between the TS4000s by typing a message into the Tx 

Message box of the Comm Port window followed by the ENTER key. 

4)   Automated tests can be run that will send data and verify that it is received 

correctly.  To select a test, use the Test Setup command from the Setup 
menu.  Use the on line help to obtain more information about each test.