Teledesign Systems Inc TS4000EH Manuel D’Utilisation
TS4000 Radio Modem User’s Manual
Testing
69
AirScan enables the TS4000 to be used as a frequency scanner. AirScan is
useful for determining the frequency and magnitude of potential interference
within the TS4000’s frequency band.
To start AirScan press the AirScan button on the main screen of the
configuration program.
AirScan scans each channel within a set range of frequencies. The granularity of
the scan is fixed at the minimum channel spacing of the TS4000.
Selection Description
Live
In this mode the scanning overwrites the previous values of
signal magnitude.
signal magnitude.
Peak Hold
The display shows only the largest magnitude signal. Use
the Clear Screen button to reset the values.
the Clear Screen button to reset the values.
This sets the frequency in the middle of the display. Note that the frequencies at
the edges of the display are also indicated.
This is the frequency span from the left edge to the right edge of the display.
AirScan
AirScan Controls
Display
Center Frequency
Frequency Span