Twinhead International Corporation E14A Manuel D’Utilisation
Chapter 2 — Getting Started
Connecting the Printer
To connect a printer to your notebook via the USB port, use the optional
USB to printer adapter cable.
USB to printer adapter cable.
Note:
Before use, you must install the driver for the
adapter cable.
The PCMCIA Card Slot
The PC card slot can be used as an interface between your computer and
a variety of communications devices, such as network adapters, SCSI
adapters, fax/modems, or provide additional data storage capacity. Your
computer's PC card slot
a variety of communications devices, such as network adapters, SCSI
adapters, fax/modems, or provide additional data storage capacity. Your
computer's PC card slot
supports PCMCIA Type II and 32-bit CardBus.
Installing a Card
1. The top side of a PCMCIA
card is usually identified with
a label. Insert the card into
the slot with the label side up
and the edge with pinhole
contacts going in first.
a label. Insert the card into
the slot with the label side up
and the edge with pinhole
contacts going in first.
2. Insert the card into the slot.
You will feel some resistance
as the card slides into the
back of the slot.
as the card slides into the
back of the slot.
3. PCMCIA cards require drivers, or a program that allows the
operating system to use a specific device. Many drivers are
included with Windows, but if not, you will be prompted to install
the driver included with your card.
included with Windows, but if not, you will be prompted to install
the driver included with your card.
Slide the card
into the slot.
into the slot.
Push the button to
eject the card.
eject the card.
Removing a Card
1. If a card is in use, you must shut down the card before removing it.
Or you can click the PCMCIA icon on the right side of the taskbar,
then click Stop.
then click Stop.
2. Select the PCMCIA card in the next window, and click “OK”.
3. Press the eject button on the card slot to release the button.
4. Press again to release the card.
3. Press the eject button on the card slot to release the button.
4. Press again to release the card.
26