Twinhead International Corporation E14A ユーザーズマニュアル

Chapter 2 — Getting Started 

To connect a printer to your notebook via the USB port, use the optional 
USB to printer adapter cable. 

 

 Before use, you must install the driver for the 

adapter cable. 

The PC card slot can be used as an interface between your computer and 
a variety of communications devices, such as network adapters, SCSI 
adapters, fax/modems, or provide additional data storage capacity. Your 
computer's PC card slot

 

supports PCMCIA Type II and 32-bit CardBus. 

1.  The top side of a PCMCIA 

card is usually identified with 
a label. Insert the card into 
the slot with the label side up 
and the edge with pinhole 
contacts going in first. 

2.  Insert the card into the slot. 

You will feel some resistance 
as the card slides into the 
back of the slot. 

 

 

3.  PCMCIA cards require drivers, or a program that allows the 

operating system to use a specific device. Many drivers are 
included with Windows, but if not, you will be prompted to install 
the driver included with your card. 

Slide the card 
into the slot. 

Push the button  to 
eject the card. 

 

1.  If a card is in use, you must shut down the card before removing it. 

Or you can click the PCMCIA icon on the right side of the taskbar, 
then click Stop.  

2.  Select the PCMCIA card in the next window, and click “OK”. 
3.  Press the eject button on the card slot to release the button.  
4.  Press again to release the card.