Marlow Industries PCE2 Manuel D’Utilisation

marlow industries, inc.



Subsidiary of II-VI INCORPORATED
10451 Vista Park Road

 Dallas Texas 75238-1645

PROPRIETARY INFORMATION

PCE-2 HEAT/COOL BED,

USER INSTRUCTIONS

Cage No.: 55686

Document Number: 020-0047

Revision: 1

Page: 6 of 7

3.6

Mattress pad overlay.

3.6.1

Top quilted surface (3 layers)

3.6.2

100% polyester fabric (top)

3.6.3

100% polyester batting fill (middle)

3.6.4

100% cotton (bottom)Top quilted surface (3 layers)

3.6.5

Air distribution layer spacer fabric (100% polyester)

3.6.6

Bottom layer against mattress (100% cotton)

3.6.7

Side curtain/skirt (100% polyester)

3.7 Hose

3.7.1

PVC/urethane blend reinforced with wire helix

3.7.2

Thermoplastic elastomer reinforced with wire helix

4.0 INSTALLATION

INSTRUCTIONS

4.1

Unpack the heating/cooling units.

4.1.1

Unit BOM should Include

4.1.1.1 (1-2) Base Units

4.1.1.2 (1-2) Remote AC-DC Desktop Power Supplies with wall cords

4.1.2 Topper

BOM

4.1.2.1 Mattress Topper with (2) Hoses

4.2

Place the mattress topper on the bed similar to any ordinary mattress topper.

4.3

Hoses can be placed at the head or foot of the bed depending on preferred location of the Heating/Cooling

Units.

4.4

Units should be placed under the bed.

4.5

Connect hoses to the units.

4.6

Connect power supplies to wall plug.

4.7

Connect DC lines to Heating/Cooling Units.

4.8

Turn "on" the Bluetooth setting on your device.

4.9

Connect to the bedding units.

4.10

Install firmware on Bluetooth compatible mobile device.

4.11

Sync your device with the bedding system using Mac Addresses displayed on rear of the unit.

4.12

You can control three primary functions.

4.12.1 Blower Speed – Low to High Infinitely Variable

4.12.2 Temperature at unit – Low to High Infinitely Varaible

4.12.3 Timer – Length of time in the conditioning mode up to 10 hours

4.13

Set to moderate conditions and work your way to the more extreme temperature/blower conditions.

4.14

When unit is not in conditioning mode it is running the fans at a reduced level to dry and condensation that

has occurred.

4.15 Enjoy!