Sun Nuclear Corporation 1136 Manuel D’Utilisation

54

4 

Select “Specify a location,” clear any other check boxes, and click Next. The computer will 
search for a driver, install it, and display the results (Figure 4-16).

5 

Click Next to install the ftdibus.inf driver.

6 

Repeat steps 2 through 6 to install the ftdiport.inf driver. This completes the driver installation

7 

Launch the application software.

Installing USB drivers for Windows 98SE and ME

Installation for Windows 98SE and ME is similar to Windows 2000, except that the screens have 
a slightly different appearance, and you must manually enter the location of the drivers.

Drivers are located in the following directory:
•

C:\Program Files\SNC\IVD2\USBDriver
NOTE: Pull down the list in “Include this location in the search” in the Found New Hardware 
Wizard to find the location of the drivers.

Verifying installation of USB drivers

If you want to verify the installation, select Control Panel > System > Hardware > Device Manager 
> View > Devices by type. In the Device Manager window, expand the Ports (COM/LPT) to show 
“USB Serial Port (COM n)” where n is the port number assigned (Figure 4-17).

Using the USB connection

Use the USB connection the same as you would the serial connection.
NOTE: Do not disconnect the USB cable until after you have closed the application software to pre-
vent loss of data.