Advance Security Inc T36 Manuel D’Utilisation

 

Q. DOME LIGHT CONVENIENCE DELAY & SUPERVISION 

The alarm with a unique feature which will turn on your vehicle dome light as following: 
1. Upon disarming, the interior light will remain on for 30 seconds. 
2. If the vehicle is intruded, the interior light will flash for the same duration as the siren. 
Note: Turn on the ignition switch or arm the alarm will turn off the dome light. 

(See Alarm Feature II – 2

Programming). 

If the vehicles door locks have been interfaced to the security system, the system will automatically lock 
the vehicle's doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is 
turned “OFF”. 

  Press and hold 

 button on the transmitter for two seconds to remote control the 

trunk release or other electric devices.   

   

 

Activate The AUXILIARY 1: Spin up the

   

switch to the page

 3

 and then press the “Auxiliary 1” button or 

press the transmitter 

 and 

  buttons at the same time to active Auxiliary 1 function.   

Activate The AUXILIARY 2: Spin up the

   

switch to the page

 3

 and then press the “Auxiliary 2” button or 

press the transmitter 

 and 

  buttons at the same time to active Auxiliary 2 function.   

Activate The AUXILIARY 3: Spin up the

   

switch to the page

 3

 and then press the “Auxiliary 3” button or 

press the transmitter 

 and 

  buttons at the same time to active Auxiliary 3 function.   

Activate The AUXILIARY 4: Spin up the

   

switch to the page

 3

 and then press the “Auxiliary 4” button or 

press the transmitter 

 and 

  buttons at the same time to active Auxiliary 4 function.   

The channel output is user-programmable timer output. For instance, this timer output may be used to turn 
on the headlight, power window or sunroof. (Factory defaults setting at momentary output.) 

 

Your remote transmitter can be utilized to control multi- vehicle security system, to program the remote 
control transmitter to a second vehicle, follow the instructions for Transmitter programming. All 
programming parameters be the same except for the following: 
For Regular Remote Control Transmitter: 

1. Prior to pushing any button on the transmitter. Press the Select 

II

 button first on the transmitter. 

2. Once 

II

 button is pressed the LED on the transmitter will illuminate for 3.5 seconds to indicate the 

second transmitter pin code has built-in. 

3. While the LED is illuminated, press any button on the remote control transmitter to control a second 

vehicle security system.   

 
A maximum of 
four vehicle’s 
security system 
can be control 
by this 
transceiver. 

TX1 White Vehicle 

 

TX2 Blue Vehicle

TX3 Yellow Vehicle 

 
 
 
 
 
 
  TX4 Green Vehicle

 

 

The four transmitters will 

display on the OLED 

screen, you can choice 

one of four transmitters 

to control your vehicle 

security system.   

Now you can press 
button to remote control 

The “

 yellow 

vehicle security system.

 

17