Tyco Safety Products/Sensormatic AMS9050 Manuel D’Utilisation
Preliminary
AMC-7000 Integrated
Metal Foil Detection
Metal Foil Detection
Installation Guide
ZPMETAL-DET
About this Guide
This installation guide explains how to install the
AMC-7000 Integrated Metal Foil Detection kit
(ZPMETAL-DET). The AMC-7000 is an option for
AMS-9050 controllers connected to dual 2m
Ultra•Exit antennas (ZS1090, ZS1091, and
ZS1102) with the Integrated Traffic Flow option
(ZPUE-TRAFFICNTR). Other related documents
are:
AMC-7000 Integrated Metal Foil Detection kit
(ZPMETAL-DET). The AMC-7000 is an option for
AMS-9050 controllers connected to dual 2m
Ultra•Exit antennas (ZS1090, ZS1091, and
ZS1102) with the Integrated Traffic Flow option
(ZPUE-TRAFFICNTR). Other related documents
are:
• Installation and Service Guide, AMS-9050
Controller, 8200-0537-02
• Installation Guide, Ultra•Exit Transceiver
Antennas, 8200-0537-16
Note:
Because customer requirements dictate the
placement of system components, your
Sensormatic representative will supply this
information separately.
Sensormatic representative will supply this
information separately.
About the Product
The AMC-7000 Integrated Metal Foil Detection kit
(ZPMETAL-DET) is an AMS-9050 option that
detects metal with a large surface area, such as
aluminum foil, when it passes between the
pedestals of a system. It is designed to not detect
metal objects with small continuous surfaces, such
as keys and shopping carts. The kit can only be
used with AMS-9050 controllers and only for dual-
pedestal 2m systems.
(ZPMETAL-DET) is an AMS-9050 option that
detects metal with a large surface area, such as
aluminum foil, when it passes between the
pedestals of a system. It is designed to not detect
metal objects with small continuous surfaces, such
as keys and shopping carts. The kit can only be
used with AMS-9050 controllers and only for dual-
pedestal 2m systems.
AMC-7000
The AMC-7000 consists of the following:
• a circuit board housed in a metal enclosure
• cabling and associated connectors
• mounting brackets and associated hardware
• cabling and associated connectors
• mounting brackets and associated hardware
AMS-9050
Controller
Controller
Features
• Automatic Detection Adjustment – the system
adjusts itself to changes in the amount of metal
in the environment.
in the environment.
• Enclosure is suitable for use in environmental
air handling space other than ducts or plenums.
• Directional Inhibit support – using the People
Counter option, system can be set to alarm for
incoming metal only, out-going metal only, or
both.
incoming metal only, out-going metal only, or
both.
• Multiple alarm methods – the system can
indicate the presence of metal by several
methods: a visual alarm at the pedestal, an
audio alarm at the pedestal, the triggering of a
relay that connects to another device (such as a
paging system), or an alarm at a digital remote
alarm.
methods: a visual alarm at the pedestal, an
audio alarm at the pedestal, the triggering of a
relay that connects to another device (such as a
paging system), or an alarm at a digital remote
alarm.
• Metal foil detection counts – the number of
metal foil detections can be displayed on an
optional Local Device Manager (LDM).
optional Local Device Manager (LDM).
• Low power requirements – can be powered by
Alarm output of AMS-9050 controller.
• Large coverage area – detects metal between
two 2m (6.5ft) antennas up to 1.5m (5ft) high.
• Wired synchronization – wired synchronization
of controller with other controllers must use
Universal Synchronization because the Wired
Synch port is needed for Metal Foil Detection.
Universal Synchronization because the Wired
Synch port is needed for Metal Foil Detection.
© 2008 Sensormatic Electronics Corp.
AMC-7000 INTEGRATED METAL Foil DETECTION
8200-2609-01, REV. 3a
INSTALLATION GUIDE
17 OF 31