Tyco Safety Products/Sensormatic AMSUSUPB Manuel D’Utilisation
ULTRA 1.5 METER ABS PEDESTAL SYSTEM
8200-1048-06, REV. A
INSTALLATION GUIDE
17 of 44
*8200-1048-06*
Step 2: Connecting the secondary pedestal
To connect the cables to the receiver board on the secondary pedestal, complete the following step:
WARNING:
Risk of electric shock
Disconnect power from the primary pedestal before you proceed.
• On the receiver board of the secondary pedestal, attach the interconnect cable to the 5-position Euro-
style connector which is plugged into connector P2
.
For the location of the P2 connector, see Figure 6.
Table 12. Secondary pedestal receiver cable connections
Pin
Color
Signal name
1
Black
Top coil
2
Red
Top coil return
3
Green
Bottom coil
4
White
Bottom coil return
5
Shield
Shield
Figure 5. Connecting the interconnect cable
Figure 6. P1, P2 and P3 locations on the receiver board
A
Connector P1 location
C
Connector P3 location
B
Connector P2 location
A
B
C