3Com Corporation WL306 Manuel D’Utilisation
Installation Overview
3
Installation Overview
1
Choose the best place for the installation (flat surface, wall, or acoustical ceiling).
Look for a location away from equipment that might cause radio interference. The
site should be elevated and centrally located relative to the users on your wireless
network.
Look for a location away from equipment that might cause radio interference. The
site should be elevated and centrally located relative to the users on your wireless
network.
2
Make sure that you are familiar with the following items and have them available
where required for your installation:
where required for your installation:
■
Access point
■
3Com Integrated Power-over-Ethernet power supply and power cord
■
Standard category 5 straight-through (8-wire) Ethernet cable
■
Mounting hardware (for wall- or ceiling-mount installations)
It may be useful for you to conduct a site survey before permanently installing the
access point. See “Conducting a Site Survey” on page 35.
access point. See “Conducting a Site Survey” on page 35.
3
4
For information on improving the signal between the access point and a wireless
client, see “Selecting A Different Antenna” on page 11.
client, see “Selecting A Different Antenna” on page 11.
5
After hardware installation is complete, install the access point tools, utilities, and
user guide from the installation CD. See “Installing Software Utilities” on page 14.
user guide from the installation CD. See “Installing Software Utilities” on page 14.
6
To set up a wireless client to authenticate through the access point to your RADIUS
server, refer to “Using the Wireless 802.1x Agent” on page 19.
server, refer to “Using the Wireless 802.1x Agent” on page 19.
7
To set access point security or configure the wireless network, refer to
“Configuring the Access Point 8000” on page 23.
“Configuring the Access Point 8000” on page 23.
8
Review the system settings and ensure they are suitable for your site.