Somfy Systems RSZ Manuel D’Utilisation
GRABER
GRABER
GRABER
GRABER
9
Each shade is pre-programmed from the factory to operate up and down corresponding to the appropriate buttons on
your Virtual Cord. However, if the directions are inadvertely reversed, follow these steps to return the shade to
proper operation.
your Virtual Cord. However, if the directions are inadvertely reversed, follow these steps to return the shade to
proper operation.
All programming steps are associated with a time-out feature to preserve battery life.
Reversing Motor Direction
1. Move the shade to any position between the
upper and lower limits by pressing and
releasing the directional buttons.
releasing the directional buttons.
The shade will jog and the LEDs on the motor will
begin to blink green and red and the LEDs on the
remote will blink green.
begin to blink green and red and the LEDs on the
remote will blink green.
Shade direction has now been reversed; however,
the upper and lower limits have been maintained.
the upper and lower limits have been maintained.
2. Press and hold UP and DOWN buttons
until the LED light turns amber then
release buttons.
release buttons.
3. Press and hold the UP and DOWN buttons
until the LED turns amber then
release buttons.
release buttons.