Rockwell Collins Inc. 8222210 Manuel D’Utilisation

D r a f t 1 A - C I S C O C O N F I D E N T I A L

2-8

Cisco Aironet 1240AG Series Access Point Hardware Installation Guide

OL-7293-01

Chapter 2 Installing the Access Point

Mounting Below a Suspended Ceiling

Note

To comply with NEC code, a #10-24 grounding lug is provided on the mounting plate.

You should review

before beginning the mounting process.

Figure 2-4

T-Rail Mounting Parts

---- TBD -----

Follow these steps to mount your access point on a suspended ceiling:

Step 1

Decide where you want to mount the access point.

Step 2

Attach two T-rail clips to the suspended ceiling T-rail.

Step 3

Use the mounting plate to adjust the distance between the T-rail clips so that they align with the holes in
the mounting plate.

Step 4

Use a standard screwdriver to tighten the T-rail clip studs in place on the suspended ceiling T-rail. Do
not overtighten.

Step 5

Install a plastic spacer on each T-rail clip stud. The spacer’s legs should contact the suspended ceiling
T-rail.

Step 6

Attach the mounting plate to the T-rail clip studs and start a Keps nut on each stud.

Suspended ceiling T-rail

mounting plate

T-rail clips

Keps nut (contains an attached lock washer)

Plastic spacer

74121