CCL ELECTRONICS LTD 3110A1703 Manuel D’Utilisation
MAX record
MIN record
Erase MAX/MIN
records
3. Perform a manual reset or press and hold
[ MEM / - ] key for
2 seconds when the unit is displaying MAX/MIN records or in
normal mode to erase the records.
WIRELESS SENSOR SIGNAL RECEIVING AND DISPLAY
1. In normal mode, press
1. In normal mode, press
[ SENSOR ] key once to start receiving
and reset the current displaying channel. The signal icon will flash
along.
For example, when
CH1 is displayed, pressing [ SENSOR ] key
will start receiving for
CH 1 only.
2. The signal icon will flash until the reception succeeded. If no
signal is received within 5 mins the icon will disappear.
Receiving wireless signal after
manual reset or the
[ SENSOR ]
key is pressed
When waiting for signals, “--” will
display in the readings field
Fair wireless sensor signal
3. In normal mode, press
[ CHANNEL / + ] key to switch the display
between
INDOOR and CHANNEL 1~8.
4. In normal mode, press and hold
[ CHANNEL / + ] key for 2
seconds to toggle auto-cycle mode, which alternately displays the
channels at 4 second intervals. The “ ” icon will show on the
display.
5. During auto-cycle mode, press
[ CHANNEL / + ] key once to stop
auto-cycle and display the current channel.
6. To check the validity of the signals from each wireless sensor,
press
[ CHANNEL / + ] key repeatedly in normal mode to display
each channel. Using auto-cycle mode will only display the
communicated channels.
For example, when
CHANNEL 1 and 5 have received the signals
from the corresponding sensors, you can press and hold
[ CHANNEL / + ] key for 2 seconds to display the readings of
INDOOR, CHANNEL 1 and 5.
INDOOR
CHANNEL 1
CHANNEL 5
7. If the signal for
Channel 1~8 has discontinued and does
not recover within 1 hour, the signal icon will disappear. The
temperature and humidity will display “
Er” for the corresponding
channel.
8. If the signal does not recover within 48 hours, the “
Er” display will
become permanent. You need to replace the batteries of the “
Er”
channel’s sensors and then press
[ SENSOR ] key to pair up with
the sensors per each “
Er” channel again.
Signal discontinued
Note:
You need to press
[ SENSOR ] key to manually receive the sensor’s
signal after you’ve placed the new batteries to the wireless sensor, or
the main unit fail to receive the wireless sensor’s signal.
THE LOW TEMPERATURE ICON
When the outdoor temperature is 37.4°F or below, the low
When the outdoor temperature is 37.4°F or below, the low
temperature icon “ ” will display.
Outdoor 37.4°F or below (icon flashes)
THE LOW BATTERY ICON
If the main unit or sensor is low in battery, the low battery icon “
If the main unit or sensor is low in battery, the low battery icon “
”
will display. The icon will only appear when the corresponding
channel is displayed.
For example, the sensor of
CHANNEL 1 is low in battery. When
CHANNEL 1 is displayed, the icon “ ” will show.
IMPORTANT NOTE
- Attention! Please dispose of used unit or batteries in an
ecologically safe manner.
- Always place the unit away from interfering sources such as TV
set, computer, etc.
- Avoid placing the unit on or next to metal plates.
- Technical specifications and user manual contents for this product
are subject to change without notice.
SPECIFICATION
MAIN UNIT
Indoor operating temperature range 23°F ~ 122°F (-5°C ~ 50°C)
Humidity display range
MAIN UNIT
Indoor operating temperature range 23°F ~ 122°F (-5°C ~ 50°C)
Humidity display range
1% ~ 99 %
Resolution of temperature
0.1°C/°F
Resolution of humidity
1%
Wireless SENSOR
Outdoor operating temperature
Outdoor operating temperature
range (based on Lithium battery)
-40°F ~140°F ( -40°C ~ 60°C)
Outdoor operating humidity range
1% ~ 99 %
Resolution of temperature
0.1°C/°F
Resolution of humidity
1%
Wireless sensor signal
433MHz
No. of remote sensor
Up to 8 units
RF transmission range
Maximum 30 meters
POWER
Main unit
Main unit
1.5V AA X 4 (alkaline battery recommended)
Wireless sensor 1.5V AA X 2 (alkaline battery recommended)
DIMENSION
Main unit
Main unit
130(W) x 112 (H) x 27.5(D)mm
Wireless sensor
61(W) x 113.6 (H) x 39.5(D)mm