Baicells Technologies Co. Ltd. MBS1100 Manuel D’Utilisation
Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx
11
arrestor needs to connect to one grounding screw via an M6 screw.
Another grounding screw is used for connecting to the reliable outdoor grounding
point (earth). The connecting point must be tin-soldered.
The connection of the grounding points and the ground bar need to be tight and
reliable. Rustproofing the terminals is required. This can be done with rust
preventing paint, anti-oxidation coatings, grease, and so on.
Weatherproof Protection
3.5
1. To weatherproof the connections, wrap them with all-weather electrical tape and
mastic tape, as shown in Figure 3-1.
Figure 3-1 Antenna Weatherproofing
2. Be aware that at least three layers of tapes are needed, and make sure that the
wrapping direction of the last layer is from the bottom up. The last layer should be
tight enough to keep it from cracking.