Toshiba 20AS22 Manuel D’Utilisation
CH SET
PICTURE
LANGUAGE
V-CHIP SET
LOCK
PICTURE
LANGUAGE
V-CHIP SET
LOCK
MENU
〈 + / – / ENTER / MENU 〉
LOCATION OF CONTROLS
For proper operation, before selecting channels, they should be set into the TV's memory.
See "TO MEMORIZE CHANNELS".
See "TO MEMORIZE CHANNELS".
DIRECT CHANNEL SELECTION buttons (0-9) - Press these buttons to select a channel. The
channel number will appear on the upper right corner of the TV screen. If an invalid channel
number is selected, the display will revert to the previous channel.
channel number will appear on the upper right corner of the TV screen. If an invalid channel
number is selected, the display will revert to the previous channel.
TV MODE DIRECT CHANNEL SELECTION - When the TV/CABLE menu option is in the TV
position, all channels can be instantly selected by using two buttons (For example, to select chan-
nel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a few sec-
onds). For channels 10 and above, press the 2 digits in order.
position, all channels can be instantly selected by using two buttons (For example, to select chan-
nel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a few sec-
onds). For channels 10 and above, press the 2 digits in order.
CABLE mode direct channel selection
When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows:
When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows:
To turn on the TV, press POWER.
The VOLUME can be adjusted to a desired level by pressing VOL (VOLUME) + or –.
The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER. As
the sound level increases, so do the number of BARS AND THE NUMBER on the screen.
The same is true for decreasing the level.
the sound level increases, so do the number of BARS AND THE NUMBER on the screen.
The same is true for decreasing the level.
Set the TV/CABLE menu option to the appropriate position. When shipped from the factory,
this menu option is in the CATV setting. See "TO MEMORIZE CHANNELS".
this menu option is in the CATV setting. See "TO MEMORIZE CHANNELS".
TV OPERATION
1
2
1. POWER indicator - Lights up when the power is turned on.
2. Remote Sensor - Signals from the Remote Control unit are received here.
3. POWER Button - Press to turn the TV on or off.
4. VOLUME
2. Remote Sensor - Signals from the Remote Control unit are received here.
3. POWER Button - Press to turn the TV on or off.
4. VOLUME
▲/▼ Buttons - Press to raise or lower the level of the sound.
(MENU Buttons) - Press both VOLUME
▲/▼ Buttons at the same time to display the On-
Screen menu functions.
(SET + / – Buttons) - Press to select the desired setting during On-Screen operations.
(SET + / – Buttons) - Press to select the desired setting during On-Screen operations.
5. CHANNEL
▲/▼ Buttons - Press to select a higher or lower numbered channel set into memory.
(ENTER Button) - Press to enter or select information for On-Screen operations.
(RESET Button) - Press, while in the On-Screen menu mode, to reset the On-Screen picture
adjustments to their factory preset positions.
(RESET Button) - Press, while in the On-Screen menu mode, to reset the On-Screen picture
adjustments to their factory preset positions.
6. AUDIO VIDEO IN Jacks - Audio and video signal cables from an external source can be
connected here.
1-9
10-12
13-99
100-125
Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press "002".
Press "0", then remaining 2 digits.
Example, to select channel 12, press "012".
Press the 2 digits in order.
Example, to select channel 36, press "36".
Press the 3 digits in order.
Example, to select channel 120, press "120".
Example, to select channel 2, press "002".
Press "0", then remaining 2 digits.
Example, to select channel 12, press "012".
Press the 2 digits in order.
Example, to select channel 36, press "36".
Press the 3 digits in order.
Example, to select channel 120, press "120".
NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language,
but the Closed Caption text will not be affected by the language selection.
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language,
but the Closed Caption text will not be affected by the language selection.
Press MENU.
Press SET + or – until the indicator next to "LANGUAGE" begins to flash,
then press ENTER.
then press ENTER.
Press SET + or – until the " " indicator points to the desired
language: English (ENGLISH), Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
language: English (ENGLISH), Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
Press MENU again.
3
4
1
2
FRANCAIS
ENGLISH
ESPAÑOL
LANGUAGE / IDIOMA / LANGUE
〈 + / – / ENTER / MENU 〉
This TV can display the channel number, on screen displays and picture adjustments on the
screen in English, Spanish or French.
On-screen language selection (step 3) will automatically appear on the screen when you press
MENU button initially. Select the language you prefer first, then proceed with the other menu options.
screen in English, Spanish or French.
On-screen language selection (step 3) will automatically appear on the screen when you press
MENU button initially. Select the language you prefer first, then proceed with the other menu options.
SETTING LANGUAGE
3
TV - VHF/UHF channels
CABLE - CABLE TV channels
CABLE - CABLE TV channels
4
CH (CHANNEL) + and – buttons
Press and release CH (CHANNEL) + or –. The channel automatically stops at the next
channel set into memory. Press and hold the button down to change channels more
quickly.
Press and release CH (CHANNEL) + or –. The channel automatically stops at the next
channel set into memory. Press and hold the button down to change channels more
quickly.
NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15
minutes.
This TV is equipped with a channel memory feature that allows the TV to skip up or down to the
next channel set into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the TV's memory. In addition to normal
VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this
menu option is in the CABLE setting.
next channel set into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the TV's memory. In addition to normal
VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this
menu option is in the CABLE setting.
TV/CABLE SELECTION
Press MENU.
Press SET + or – until the indicator next to "CH SET" begins to flash, then
press ENTER.
press ENTER.
Press SET + or – until the indicator next to "TV/CABLE" begins to
flash.
flash.
Press ENTER to select the TV or CABLE mode. The arrow indicates the
selected mode.
selected mode.
Press MENU repeatedly until the MENU screen is cleared.
NOTE:
Contact your cable company to determine the type of cable system used in your area.
Contact your cable company to determine the type of cable system used in your area.
AUTOMATIC CHANNEL MEMORY
Press MENU.
Press SET + or – until the indicator next to "CH SET" begins to flash, then
press ENTER.
press ENTER.
Press SET + or – until the indicator next to "AUTO CH MEMORY" be-
gins to flash, then press ENTER. The TV will begin memorizing all the
channels available in your area. Channel numbers will remain red until
auto memorizing is complete.
gins to flash, then press ENTER. The TV will begin memorizing all the
channels available in your area. Channel numbers will remain red until
auto memorizing is complete.
Press MENU repeatedly until the MENU screen is cleared.
TO ADD/DELETE CHANNELS
AUTO CH MEMORY
TV
ADD / DELETE
CABLE
á+ / Ð / ENTER / MENUñ
AUTO CH MEMORY
TV
ADD / DELETE
CABLE
á+ / Ð / ENTER / MENUñ
AUTO CH MEMORY
TV
ADD / DELETE
CABLE
á+ / Ð / ENTER / MENUñ
ADD
CH 012
〈 + / – / ENTER / MENU 〉
MENU
〈 + / – / ENTER / MENU 〉
CH SET
PICTURE
LANGUAGE
V-CHIP SET
LOCK
PICTURE
LANGUAGE
V-CHIP SET
LOCK
Press MENU.
Press SET + or – until the indicator next to "CH SET" begins to flash, then
press ENTER.
press ENTER.
Press SET + or – until the indicator next to "ADD/DELETE" begins to
flash, then press ENTER.
flash, then press ENTER.
Select the desired channels to be added or deleted using the Direct
Channel Selection buttons (10 keys. 0-9), CH + or – or SET + or –.
Channel Selection buttons (10 keys. 0-9), CH + or – or SET + or –.
Press ENTER to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the channel indica-
tion will be red. Press ENTER if you wish to ADD the unmemorized
channel. The channel indicator will change from red to green when a
channel is added and the channel will be memorized.
If an unmemorized channel was selected (step 4), the channel indica-
tion will be red. Press ENTER if you wish to ADD the unmemorized
channel. The channel indicator will change from red to green when a
channel is added and the channel will be memorized.
If a memorized channel was selected (step 4), the channel indication will
be green. Press ENTER if you wish to DELETE the channel from
memory. The channel indicator will change from green to red when a
channel is deleted. Repeat Steps 4 and 5 for each channel to be added
or deleted.
be green. Press ENTER if you wish to DELETE the channel from
memory. The channel indicator will change from green to red when a
channel is deleted. Repeat Steps 4 and 5 for each channel to be added
or deleted.
Press MENU three times after adding or deleting all of the desired
channels, to return to normal TV viewing.
channels, to return to normal TV viewing.
MENU
〈 + / – / ENTER / MENU 〉
CH SET
PICTURE
LANGUAGE
V-CHIP SET
LOCK
PICTURE
LANGUAGE
V-CHIP SET
LOCK
MENU
〈 + / – / ENTER / MENU 〉
CH SET
PICTURE
LANGUAGE
V-CHIP SET
LOCK
PICTURE
LANGUAGE
V-CHIP SET
LOCK
TO MEMORIZE CHANNELS
1
2
3
4
5
1
2
2
3
4
1
2
4
5
3
6
CLOSED CAPTION
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display Closed Captioned television programs.
Closed Captioning will display text on the screen for hearing impaired viewers or it will translate
and display text in another language.
This television has the capability to decode and display Closed Captioned television programs.
Closed Captioning will display text on the screen for hearing impaired viewers or it will translate
and display text in another language.
TO VIEW CLOSED CAPTIONS
Press CAP/TEXT on the remote control to switch between normal TV and the two Closed Cap-
tion Modes (Captions and 1/2 of Full Screen Text).
Press CAP/TEXT on the remote control to switch between normal TV and the two Closed Cap-
tion Modes (Captions and 1/2 of Full Screen Text).
Captions: This Closed Caption Mode will display text on the screen in English or another
language (depending on the setting of Closed Captions 1/2. Generally, Closed Captions in
English are transmitted on Captions Channel 1 and Closed Captions in other languages are
transmitted on Captions Channel 2.
The Captions will appear in places on the screen where they will least interfere with the picture,
usually on the bottom of the screen. News programs will usually show three-line Closed Captions
which scroll onto the screen. Most other shows provide two or three lined Captions placed near
the character who is speaking so the viewer can follow the dialogue. Words in italics or
underlined describe titles, words in foreign languages or words requiring emphasis. Words that
are sung usually appear enclosed by musical notes.
language (depending on the setting of Closed Captions 1/2. Generally, Closed Captions in
English are transmitted on Captions Channel 1 and Closed Captions in other languages are
transmitted on Captions Channel 2.
The Captions will appear in places on the screen where they will least interfere with the picture,
usually on the bottom of the screen. News programs will usually show three-line Closed Captions
which scroll onto the screen. Most other shows provide two or three lined Captions placed near
the character who is speaking so the viewer can follow the dialogue. Words in italics or
underlined describe titles, words in foreign languages or words requiring emphasis. Words that
are sung usually appear enclosed by musical notes.
Text: The Text Closed Caption Mode will usually fill 1/2 of full screen with a programming
schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until it
is changed, even if the channel is changed. If the Captions signal is lost due to a commercial or
a break in the signal, the Captions will reappear when the signal is received again. If the channels
are changed, the Captions will be delayed approximately 10 seconds.
For television programs broadcasting with Closed Captions, look in your TV guide for the Closed
Captions symbol (CC).
schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until it
is changed, even if the channel is changed. If the Captions signal is lost due to a commercial or
a break in the signal, the Captions will reappear when the signal is received again. If the channels
are changed, the Captions will be delayed approximately 10 seconds.
For television programs broadcasting with Closed Captions, look in your TV guide for the Closed
Captions symbol (CC).
• When activating the Closed Captioned Decoder, there will be a short delay before the Closed
Captioned text appears on the screen.
• Closed Captioned text is only displayed in locations where it is available.
• If no caption signal is received, no captions will appear, but the television will remain in the
• If no caption signal is received, no captions will appear, but the television will remain in the
Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is
normal with Closed Captioning, especially with live programs. This is because during live
programs, captions are also entered live. These transmissions do not allow time for editing.
programs, captions are also entered live. These transmissions do not allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may not be
seen or may interfere with Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed Captioned
signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not
appear or may appear with strange characters or misspelled words. In this case, adjust the
antenna for better reception or use an outdoor antenna.
antenna for better reception or use an outdoor antenna.
VIDEO
CHANNEL
RESET
ENTER
SET
MENU
AUDIO
VOLUME
POWER
5
4
1 2
3
6
VIDEO
CHANNEL
RESET
ENTER
SET
MENU
AUDIO
VOLUME
POWER
3L21001A E
04/04/2002, 10:53
4
Get user manuals:
See SafeManuals.com