Eaton PPF3003CEI Manuel D’Utilisation
www.eaton.com/powerquality www.eatonelectric.com.au
Eaton® PPFi
Class II/Cat C & D, 3 Phase Premium Power Filter
Series Power & Noise Filter with Shunt Surge Diverter
3 Phase, 100-400A, 80-240kA
3 Phase, 100-400A, 80-240kA
Applications:
• All Power Circuits including "Point-of-Entry"
• Telecommunications Systems & Rectifiers
• Process & Control Systems & UPS Systems
• Computer Systems & Medical Systems
• AV circuits for clubs & hotels
• All sensitive Electronic Equipment
• Telecommunications Systems & Rectifiers
• Process & Control Systems & UPS Systems
• Computer Systems & Medical Systems
• AV circuits for clubs & hotels
• All sensitive Electronic Equipment
Key Features:
• Surge suppression & filtering in a single package
• Standard Current ratings from 100A to 400A
• 1 mode, Multi-Element Series Filter
• 2 mode, 3 stage Surge Diverter
• Surge suppression ratings from 80kA to 240kA
• Provides extensive high frequency & RF filtering
• Incorporates a EN certified EMI/RFI filter
• Panel-mounted mimic display
• Protection Fail Alarm Relay
• Enclosed in IP24 painted steel cabinet
• 5 Year Warranty
• Standard Current ratings from 100A to 400A
• 1 mode, Multi-Element Series Filter
• 2 mode, 3 stage Surge Diverter
• Surge suppression ratings from 80kA to 240kA
• Provides extensive high frequency & RF filtering
• Incorporates a EN certified EMI/RFI filter
• Panel-mounted mimic display
• Protection Fail Alarm Relay
• Enclosed in IP24 painted steel cabinet
• 5 Year Warranty
Options:
• Custom configurations
• Isolation switches & circuit breakers
• Custom cabinets
• Chassis Mount versions
• Isolation switches & circuit breakers
• Custom cabinets
• Chassis Mount versions
The PPFI is designed to provide point-of-entry (Category
C) & sub-circuit protection (Category B) against power
surges caused by external sources such as lightning strikes
& substation switching as well as providing a measure of
protection from surge events generated on the secondary side
of the filter. An ideal device for all Category locations.
C) & sub-circuit protection (Category B) against power
surges caused by external sources such as lightning strikes
& substation switching as well as providing a measure of
protection from surge events generated on the secondary side
of the filter. An ideal device for all Category locations.
The PPFI is a 3-stage protection system utilising primary &
secondary MOV protection in conjunction with a Low-Q LC
filter. The unit provides filtering of the line harmonics, noise
& RF transmitters with a cut-off frequency of <10kHz & a
minimum attenuation of 70dB above 1MHz. Special care has
been taken in the design of the filter to minimise ringing caused
by light loads, surge diverter operation & inductive load back-
EMF.
secondary MOV protection in conjunction with a Low-Q LC
filter. The unit provides filtering of the line harmonics, noise
& RF transmitters with a cut-off frequency of <10kHz & a
minimum attenuation of 70dB above 1MHz. Special care has
been taken in the design of the filter to minimise ringing caused
by light loads, surge diverter operation & inductive load back-
EMF.
All models in the PPFI Series are fully enclosed in wall
mounting IP24 steel enclosures. A graphical mimic display
provides at-a-glance indication of the status of the PPFI with
indicators showing correct functions in green & faults in
red. The alarm function provides a summary alarm output for
protection failure & power failure.
mounting IP24 steel enclosures. A graphical mimic display
provides at-a-glance indication of the status of the PPFI with
indicators showing correct functions in green & faults in
red. The alarm function provides a summary alarm output for
protection failure & power failure.