Renkforce MC-37A Keyboard 29059CR Fiche De Données

Common headphones can be connected to the 3.5 mm stereo plug socket “PHONES/OUTPUT” (42) at the rear of the keyboard. 

  Playback via the integrated speakers is automatically switched off.

Proceed as follows for connection:
•  Reduce the volume of the keyboard as far as possible.
•  Connect  the  headphones  with  the  3.5  mm  stereo  plug  socket   

“PHONES/OUTPUT”.

•  Set a low volume at the keyboard and verify it, e.g. by playing on the

clavier; put on the headphones carefully. Now set the desired volume.

   

If the volume is too high you may damage your hearing. There-

fore, set the volume to be pleasant and not too loud! 

An external amplifier (e.g. of a stereo system) can be connected to the 3.5 mm stereo plug socket “PHONES/OUTPUT” (42) at the 

rear of the keyboard. 

  Playback via the integrated speakers is automatically switched off.

Proceed as follows for connection:
•  Reduce the volume of the keyboard as far as possible. The same applies for the

amplifier.

•  Connect the amplifier with the 3.5 mm stereo plug socket “PHONES/OUTPUT”. Al-

ways select an analogue input with line level, e.g. the TAPE or AUX input.

•  Set a low volume at the keyboard and the amplifier and verify it, e.g. by playing on the

clavier; put on the headphones carefully. Now set the desired volume.

   

If the volume is too high you may damage your hearing. Therefore, set the 

volume to be pleasant and not too loud!