Renkforce MC-37A Keyboard 29059CR Fiche De Données
Codes de produits
29059CR
36
12. Connection of a Microphone
You can connect an external microphone to the connection “MIC IN” (44).
Note:
If the keyboard volume is turned up too high (or the volume of any connected
amplifier), there may be feedback/whistling sounds.
In this case, reduce the volume of the keyboard or amplifier or use a micro-
phone with different reception characteristics (directional microphone).
13. Connection to a Computer
Instead of conventional MIDI ports, the keyboard offers a modern USB
port for connection to a computer.
Switch off the keyboard.
Then switch on your computer and wait until the operating system is com-
Switch off the keyboard.
Then switch on your computer and wait until the operating system is com-
pletely booted.
Connect the USB socket (43) of the keyboard to a free USB port of your
Connect the USB socket (43) of the keyboard to a free USB port of your
computer with a suitable USB cable (not included in the delivery, can be
ordered separately).
Switch on the keyboard.
Windows may recognise new hardware. The required drives are part of
Switch on the keyboard.
Windows may recognise new hardware. The required drives are part of
the operating system (at least Windows XP required, Windows Vista/7/8
recommended). Follow Windows’ instructions for installation.
No software is included in the keyboard’s scope of delivery. However, you
No software is included in the keyboard’s scope of delivery. However, you
can use any programme that supports external keyboards via USB.