ONKYO TX-8020B Fiche De Données

En-

19

Press the [ON/STANDBY] button. 
Alternatively, press the remote controller’s [] 
button.

The receiver comes on, and the display lights up.

To turn the receiver off, press the [ON/STANDBY] 
button, or press the remote controller’s [] button. The 
receiver will enter Standby mode. To prevent any loud 
surprises when you next turn on the receiver, always turn 
down the volume before you turn it off.

When “Auto Standby” is set to “On,” the receiver will 
automatically enter Standby mode if there is no 
operation for 30 minutes with no audio signal input.

Default setting:  Off (North American model)

On (European model)

Notes:
• If you’re listening at a low volume, the Auto Standby 

function may detect this as silence.

• With some sources, the Auto Standby function may 

activate itself during playback.

Press the [] button to turn on the power.

Use the arrow []/[] buttons to select 
“Auto Standby,” and then press [ENTER].

Switch the ASb On/ASb Off using the arrow 
[]/[] buttons.

Notes:
• This procedure can also be performed on the receiver 

by using [SETUP], TUNING []/[], PRESET []/
[], and ENTER.

• Press [RETURN] to return to the previous menu.
• This procedure will be cancelled if the [SETUP] 

button is pressed before step 5.

MON/STANDBY

M

&(#5

or