ONKYO TX-8020B Fiche De Données
En-
24
Listening to the Radio
F
or radio tuning to work properly, you must specify the
radio frequency step used in your area.
Note that when this setting is changed, all radio presets
are deleted.
North American model (AM/FM):
are deleted.
North American model (AM/FM):
10 kHz/200 kHz (default setting) or 9 kHz/ 50 kHz
European model (AM):
9 kHz (default setting) or 10 kHz
1
Use the receiver’s [INPUT] selector, or the
remote controller’s INPUT SELECTOR
buttons to select AM or FM.
remote controller’s INPUT SELECTOR
buttons to select AM or FM.
2
Press the [SETUP] button on the remote
controller.
controller.
3
Use the arrow []/[] buttons to select
“AM/FM FreqStep” (North American model)
or “AM Freq Step” (European model), and
then press [ENTER].
“AM/FM FreqStep” (North American model)
or “AM Freq Step” (European model), and
then press [ENTER].
4
Use the arrow []/[] buttons to specify the
frequency.
frequency.
5
Press the [ENTER] button to confirm the
setting.
setting.
6
Press the [SETUP] button on the remote
controller to complete the setting.
controller to complete the setting.
Notes:
• This procedure can also be performed on the receiver
• This procedure can also be performed on the receiver
by using [SETUP], TUNING []/[], PRESET []/
[], and [ENTER].
[], and [ENTER].
• Press [RETURN] to return to the previous menu.
• This procedure will be cancelled if the [SETUP]
• This procedure will be cancelled if the [SETUP]
button is pressed before step 5.
TUNING
F/H
TUNING MODE
INPUT
D.TUN
SETUP
&/(/#/5/
ENTER
ENTER
Number
buttons
buttons
Radio Frequency Setup
North American model
European model
North American model
European model