Ultimate Technology 500 POS Manuel D’Utilisation

Table 3.  Local Mode Programming Instructions - Continued 

Note: *Default Settings 

Function Code(s) 

Operation 

Normal Indication 

 

Remarks 

70 

Indicator LED 
Mode (70) 

1. While in programming mode, at Series 500 Keyboard numeric keypad, enter Function 

Code 70. 

 
       

LED (2) turns on. 

 
2. At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to 

select LED mode of operation. 

 
       

LED Mode 

 

       
       

0 = Command mode of operation* 

       

1 = PC mode of operation 

       

 

 

LED (2) turns off. 

 
3. Program the next function code or exit programming mode by entering 99 on Series 

500 Keyboard numeric keypad or by swiping the Programmer's card.  If using the 
optional 3-position keyswitch, move switch out of the AUX position. 

71 

Enable/Disable  
Keyboard Key  
Clicks (71) 

1. While in programming mode, at Series 500 Keyboard numeric keypad, enter Function 

Code 71. 

 
       

LED (2) turns on. 

 
2. At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to 

select key click mode of operation. 

 
       

Key Click Mode  

       
       

0 = off 

       

1 = on* 

       

 

 

LED (2) turns off. 

 
3. Program the next function code or exit programming mode by entering 99 on Series 

500 Keyboard numeric keypad or by swiping the Programmer's card.  If using the 
optional 3-position keyswitch, move switch out of the AUX position.