Panasonic Arbitrator 360 Mode D’Emploi

E-27

For checking and changing the unit's operating parameters. 

You can specify whether HDD operation is
suspended or remains active if the internal HDD
temperature exceeds a prescribed level. 
Options: [Suspend] and [Active]. Default:
[Suspend]. 
The unit’s current setting is displayed in the
“Current Setting” section. 
If you change it, afterward click the [Apply]
button . 
Note:

Setting to [Active] may result in failure of the
HDD.
Use this setting at your own risk.

You can specify the minimum ambient
temperature at which HDD operation is
permitted. 
Options: [5 deg / 41 F] and [-5 deg / 23 F]. 
Default: [5 deg / 41 F]. 
The unit’s current setting is displayed in the
“Current Setting” section. If you change it,
afterward click the [Apply] button 

.

Setting to [-5 deg / 23 F] may result in failure
of the HDD.
Use this setting at your own risk.

Use [ON] and [OFF] to enable or disable impact
detection when the unit is connected to a
computer via the USB 2.0 cable. 
[ON] (default): 

Data transfer with the computer is suspended
if the unit is hit.

[OFF]: 

Data transfer is maintained even if the unit is
hit. 

The unit’s current setting is displayed in the
“Current Setting” section.
If you change it, afterward click the [Apply]
button

. 

The possibility of HDD failure is higher with
the [OFF] setting than with the [ON] setting.
Use this setting at your own risk.

You can specify the time until the unit switches
OFF automatically if left unused (when no
copying or formatting is in progress). 
Options: [Never], [5 min], [10 min], [15 min], [20
min], [25 min], and [30 min]. 
Default: [10 min]. 
The unit’s current setting is displayed in the
“Current Setting” section. 
If you change it, afterward click the [Apply]
button 

. Note that auto power OFF is

disabled when the unit is connected to a
computer.