Panasonic Arbitrator 360 Mode D’Emploi

10

11

The SDHC Memory Card is equipped with a write-protect 

switch. Sliding this switch to the LOCK position prevents 

writing data, formatting SDHC Memory Cards and deleting 

files.

Write-protect switch

If the write-protect switch is set to the LOCK position on any 

of the SDHC Memory Cards in the four card slots, recording 

will not start.

Pre-recording is the capability of including material from 

an interval before the specified start point in a recording. 

Similarly, post-recording is the capability of including 

material from an interval after the specified stop point in a 

recording.

Pre-recording and post-recording times can be set for each 

recording time. 

Audio pre-recording and post-recording times can be set 

separately from video, so pre-recording and post-recording 

audio may be partly omitted. Because video pre-recording 

and post-recording time settings have priority, audio 

pre-recording and post-recording times cannot be set longer 

than video pre-recording and post-recording times.

[REC] button pressed

(Recording starts)

[STOP] button pressed

(Recording stops)

Actual recording time

Prerecord time

Postrecord time

(Time)

Pressing the [STOP] button turns off the [REC] lamp and 
video and sound recordings stop when the post record 
interval has elapsed. 
Then the [BUSY] lamp goes off.

If “Loop Rec” is set to ON, pre-recording and post-
recording do not function.

•

•