Panasonic Arbitrator 360 Mode D’Emploi

Administrator Setup

(continued)

Radar/GPS

Radar Model

The model name of the radar gun connected to the recorder

is displayed.

Model Select

Use this function to select a radar gun.

ProLaser :

The recorder is set to support Kustom Signal’s Inc.’s

ProLaser3 as standard.

STALKER_:

The recorder is set to support Applied Concepts, Inc.’s

STALKER DUAL.

GOLDEN_:

The recorder is set to support Kustom Signals, Inc.’s

Golden Eagle II.

Note:

To use the recorder with other radar guns, consult your

supplier.

Add Model

1. Press the [ , ] buttons to select [Add Model],

and press the [

] button to confirm the entry.

Confirm

Select

2. Connect the USB memory device containing

the model data to the recorder.

3. Press the [ , ] buttons to select [OK], and

press the [

] button to confirm the entry.

Select

Confirm

A new radar gun is added.

Connection of Radar

Use this function to specify the radar gun connection port.

OFF : When not connected

Recorder: When connected to the recorder

Notes:

The remote control panel has no function for calculating
the speed of the target vehicle from the moving own
vehicle.
No distinction is made between the speed of an
approaching target vehicle and a receding one.
Some radar guns come with a function for setting
conditions that enable correct measurement of target
vehicle speed. Use this function according to the
instructions in the Operating Instructions of the radar gun.
Error messages appear when the radar gun is operating
abnormally.

GPS

Connection of GPS

Use this function to select GPS data source.

Recorder: Uses GPS data from the GPS module

attached to the recorder.

OFF

: Does not use GPS data.

Collection Time

Use this function to set the time to collect GPS data.

Setting : 5 s, 10 s, 1 s, 2 s

Speed Information

Speed Unit

Use this function to set the speed unit for own and target

vehicles.

Setting : MPH, km/h

•