Omega RD200 Manuel D’Utilisation
-13-
4. CONNECTIONS
4.1 Terminal Board Arrangement
The terminal boards shown in the following figure are of recorders with the options (alarm output +
remote contacts and communications interface).
remote contacts and communications interface).
*The mechanical relay “c” contact output is consisted of three terminals of N.O, COM and N.C.
The input terminal block and alarm terminal block (including the remote contacts terminal block) are
removable for easy connections. Each terminal block can be taken out by removing two mounting screws.
Each terminal block is connected to your recorder by a connector. For mounting or dismounting the terminal
block, turn off the power switch to prevent the electric circuits from being damaged.
removable for easy connections. Each terminal block can be taken out by removing two mounting screws.
Each terminal block is connected to your recorder by a connector. For mounting or dismounting the terminal
block, turn off the power switch to prevent the electric circuits from being damaged.
RD200
RD2800
Removed terminals have to be remounted to the recorder to which they were originally mounted.
Mounting them to other recorders may cause a malfunction in scaling.
Mounting them to other recorders may cause a malfunction in scaling.
The input terminal and alarm terminal blocks are removable.
Reference
Remarks
RD200
Remote contacts
terminals option)
terminals option)
Communications terminals
(option)
Power supply terminals
Measuring input terminals
Power supply
terminals (option)
terminals (option)
Communications terminals
(option)
Power supply terminals
Remote contacts
terminals (option)
terminals (option)
Power supply
terminals (option)
terminals (option)
Measuring input terminals
Mounting
screw
screw
Input terminal
block
block
Mounting screw
Input terminal
block
block
RD2800