Hydro Smart 115 Manuel De Montage
Normal Operation
28
│
Page
Hot Water temperatures over 125F (52°C) can cause severe
burns instantly or death from scalding.
burns instantly or death from scalding.
The outlet hot water temperature of the water heater is factory
set at 122°F (50°C).
set at 122°F (50°C).
NORMAL OPERATION
GENERAL
OPERATION
<Set temperature>
1. Turn on the 120 VAC power supply to the water heater.
2. Press the "OPERATION" button on the remote in order to turn the remote controller on. It shows the
set temperature on its display as shown the picture to the below.
3. Press the "HOT" button or the "COLD" button to set the temperature setting of the unit.
4. You can set the temperature from 99°F (38°C) to 167°F (75°C).
<Exterior view of the remote controller>
<The temperature options>
4. You can set the temperature from 99°F (38°C) to 167°F (75°C).
<Exterior view of the remote controller>
<The temperature options>
99
100 102 104 106 108 110
111
113
115
117
122
131 140 158
167
Flow rate to activate the water heater : 0.5 gallons per minute at the
default set temperature
Flow rate to keep the water heater running : 0.4 gallon per minute
NOTICE
WARNING
"COLD" Button
"OPERATION" Button
"HOT" Button
"INFOMATION" Button
CAUTION
Temperature above 122°F (50°C) can cause severe burns or death from
scalding. Children, disabled and the elderly are at high risk of being injured.
scalding. Children, disabled and the elderly are at high risk of being injured.