Emerson Transmitter 350 Mode D’Emploi

This is the current software revision.

This is the current hardware revision.

Allows the user to stop the main menu from 

scrolling and choose 1 of 5 possible parameters:  

Engineering Units (level, interface, and temp), 

Current (mA), or Percentage. Select the desired 

parameter and then press enter. “Scroll” is the 

default parameter this option keep the main menu 

scrolling.  See section “7.2 Features” for more 

details.

Interface and Temperature options only 

appear if the option(s) are configured.

Note: THIS IS NOT THE MEASURING RANGE. 

This parameter should only reflect the overall 

sensor length.  It can be adjusted by incrementing 

and decrementing the value and then pressing 

enter.

This menu can be used to change the level 

engineering units.  It can be changed by 

incrementing/decrementing to one of the following 

units:  in, ft, mm, cm, m and then pressing enter.

This menu can be used to change the temperature 

engineering units.

It can be changed by 

incrementing/decrementing to one of the following 

units: F, C, R, K and then pressing enter.

This menu only appears if the temperature

option is provided. 

18