Avital 4103 Manuel D’Utilisation
37
© 2008 Directed Electronics. All rights reserved.
5 UNLOCK OUTPUT—
1
, 2 PULSES:
This will program the unlock output to one or two pulses. When the dou-
ble pulse unlock feature is turned on, the BLUE (3) wire will supply two
negative pulses instead of a single pulse. This makes it possible to
directly interface with double pulse vehicles without any extra parts.
ble pulse unlock feature is turned on, the BLUE (3) wire will supply two
negative pulses instead of a single pulse. This makes it possible to
directly interface with double pulse vehicles without any extra parts.
6 LOCK OUTPUT—
1
, 2 PULSES:
This will program the lock output to one or two pulses. The GREEN (1)
wire will supply two negative pulses instead of a single pulse. This
makes it possible to directly interface with double pulse vehicles without
any extra parts.
wire will supply two negative pulses instead of a single pulse. This
makes it possible to directly interface with double pulse vehicles without
any extra parts.
7 FACTORY ALARM DISARM—
WITH UNLOCK
, BEFORE UNLOCK,
REMOTE START ONLY:
In the default setting the factory alarm disarm output will disarm the factory
alarm system any time the button(s) controlling Unlock is pressed. The “Be-
fore Unlock” output to disarms the factory alarm before the unlock output
activates and before remote start is activated. The “Remote Start Only”
output disarms the factory alarm only before the remote start is activated.
In the default setting the factory alarm disarm output will disarm the factory
alarm system any time the button(s) controlling Unlock is pressed. The “Be-
fore Unlock” output to disarms the factory alarm before the unlock output
activates and before remote start is activated. The “Remote Start Only”
output disarms the factory alarm only before the remote start is activated.
8 FACTORY ALARM DISARM PULSES—
1
, 2 PULSES:
Selectable for a single or double-pulse for the vehicle’s factory alarm dis-
arm input requirements.
arm input requirements.
9 COMFORT CLOSURE—
OFF (1)
:
The system can be programmed to close the windows when the system is
locked. If programmed ON, the lock output provides a 20 second pulse
when the system is locked. The output will be cancelled if the unlock but-
ton is pressed. In the Off setting the system will not do this function.
(2) Comfort closure 1 - Activates the 20 second timer after the door lock
pulse. (3) Comfort Closure 2 - Activates the 20 second timer with the door
lock pulse.
locked. If programmed ON, the lock output provides a 20 second pulse
when the system is locked. The output will be cancelled if the unlock but-
ton is pressed. In the Off setting the system will not do this function.
(2) Comfort closure 1 - Activates the 20 second timer after the door lock
pulse. (3) Comfort Closure 2 - Activates the 20 second timer with the door
lock pulse.