Beckett RWF40 CG15 Manuel D’Utilisation

CG15, CG25, CG50 Burner Manual

Propane Restrictor Description

The Beckett Propane Restrictor Conversion Kit allows for
the conversion of CG15, CG25, and CG50 burners for
use with propane gas. With the proper installation of the
restrictor and attached O-ring, adjustments and settings
for propane use will be the same as the adjustments
and settings for natural gas use as detailed in the burner
manual.

Installation

Note that Steps 1 and 2 on the reverse side refer to fully
assembled burners. Skip to Step 3 when converting a
burner without the air tube assembly installed. Refer to
Figures 16 and 17 when performing the following steps.

Figure 16 – Propane Conversion Major Components

Figure 17 – Component Locations

Major Component Key for Figure 16 & 17

Air Tube

External Gas Manifold

Jacking Screw

Propane Restrictor

Internal Gas Tube

Restrictor O-ring

Burner Housing

Gas Tube O-ring

Section: Maintenance and Service

This conversion kit shall

be installed by a qualifi ed

service agency in accordance with the

manufacturer’s instructions and all

applicable codes and requirements of the

authority having jurisdiction. (In Canada,

in accordance with the requirements

of the CAN/CGA-B149 Installation Code.) If the

information in these instructions is not followed

exactly, a fi re, explosion, or production of carbon

monoxide may result causing property damage,

personal injury or loss of life. The qualifi ed service

agency is responsible for the proper installation of

this kit. The installation is not proper and complete

until the operation of the converted appliance

is checked, as specifi ed in the manufacturer’s

instructions supplied with the kit.

CG15 is shown in the illustrations.
CG25 and CG50 are similar.

CG10 is similar with the exception of having the gas
gun assembly mounted into the air tube instead of the
housing.