Panasonic Arbitrator 360 Mode D’Emploi
(8) Menu (VPU settings) Copy
(1)
Plug
an USB memory*
to the VPU which settings need to be copied to other VPUs.
(2)
Select “CONFIG” tab of SI and enter the password to log in.
(3)
Press “Operation” and “MENU COPY” button if you agree to copy menu settings to the USB memory.
*This action creates a setting configuration file in the USB memory.
Please use the USB memory to get the setting configuration file
because even if inserting a P2 card, it cannot be created in the P2 card.
When some USB memory may not get the file, please use the different USB memory.
When some USB memory may not get the file, please use the different USB memory.
[Step 1] Get a setting configuration file from the VPU which settings need to be copied to other VPUs.
(1)
(2), (3)
Plug the USB memory stored a setting configuration file at [Step 1] to the 2
nd
VPU.
Leaving the P2 card slot open
, follow the procedure in the chart below.
[Step 2] Copy the settings to the 2
nd
VPU.
REC LED
(
RED
)
READY LED
(
Green
)
BUSY LED
(
RED
)
Procedure
Duration
(Sec)
LED Display
REC
READY
BUSY
1)
Keep pressing “REC” button for 10
sec
till “Ready” or “Busy” lamp starts to flash
10
OFF
(Flash)
(Flash)
2) Loading a configuration file
20 to 50
ON
Flash
ON
3)
Press “STOP” button
when “Ready”
lamp lights ( “REC”/”Busy” lamp starts to flash.)
---
Flash
ON
Flash
4) Reboot and the copy completed.
OFF
OFF
OFF
Either LED will flash
*
Menu/VPU setting, Administrator/Officer information, Event Type (Bookmark) and Radar setting will be copied
, but the following data will
NOT
be copied:
Operating Time for AG-CPD15/Fan/CAM1/AG-RCP30, LCD Lighting Time, BIOS creation date, Last Errors, Version for AG-CPD15/AG-RCP30/Microcontroller