Force10 Networks Force10 TeraScale E-Series E1200i Manuel D’Utilisation
18
The E1200i System
To install the E1200i system, Force10 Networks recommends that you perform the installation procedures
in the following order:
in the following order:
Step
Task
Section
1.
Prepare the site
2.
Unpack the AC chassis and components
or
Unpack the DC chassis and components
3.
Mount the AC chassis
or
Mount the DC chassis
4.
Install the cable management system
See the instructions that come with the cable management system.
5.
Install components:
•
Fan trays
•
Power Supplies (including power and
grounding cables)
grounding cables)
6.
Verify power supply and fan tray operability
7.
Install card components:
•
RPM(s) and line cards
•
SFMs
8.
Connect network cable
9.
Supply power to the chassis
10.
Initial boot
The initial boot operation automatically brings up the system to the
runtime CLI. To interrupt the automatic boot process, issue a break
key sequence (Ctrl^) if you experience boot problems.
runtime CLI. To interrupt the automatic boot process, issue a break
key sequence (Ctrl^) if you experience boot problems.
The console monitor will display the default BOOT_USER # prompt.
Refer to
Refer to
for instructions to continue the
boot process.