Mocomtech CIM-550 Manuel D’Utilisation

CiM-550 IP Enabled Satellite Modem 

Rev. 2 

CiM IP Module Checkout & Fault Isolation 

CD/CIM550.IOM 

420 

Following equipment is required: 

1 CiM-550 

Modem 

2   

2 

10/100baseT Ethernet Hub 

2 

Provided by customer 

3 

PC with NIC and a terminal 
emulation program 

2 

Provided by customer 

4 

Console cable (DB-9 to RJ-11) 

1 

Can be procured from Comtech EF Data 

5 

Ethernet cables 

4 

Provided by customer 

6 

IF cables 

2 

Provided by customer  

(For IF loopback only. Additional 
equipment required for RF connectivity.) 

7 

Traffic Generator such as 
SmartBits 

1 

Provided by customer 

 

Connect each CiM to the PC via the Ethernet Hub. 

Connect the TX IF on CiM 1 to RX IF of CiM 2 and vice-versa. 

Connect the DB-9 end of the console cable to the COM1 or COM2 port of the PC and 
the RJ-11 end to the console port at the back of CiM 1. 

Connect CiM 1 and CiM 2 to suitable power supply and turn them ON. 

 

Set the IP address on PC 1 to 172.16.10.100, mask to 255.255.255.0 and gateway to 
172.16.10.10. 

Set the IP address on PC 2 to 172.17.10.100, mask to 255.255.255.0 and gateway to 
172.17.10.10. 

Reboot the PCs (if required).