Mocomtech CIM-550 Manuel D’Utilisation

CiM-550 IP Enabled Satellite Modem 

Rev. 2 

CiM IP Module Checkout & Fault Isolation 

CD/CIM550.IOM 

421 

Configure the transmit and receive IF parameters on CiM 1 and CiM 2 via the front panel.

Note:  The IF parameters can also be set via console menu, Telnet, web interface and SNMP - 

but for this exercise, it is recommended that the front panel be used. 

Set the TxPower to minimum level. 

Before proceeding to next step, make sure that each CiM is locked to the other CiM. 

 

Launch the terminal emulation program - such as HyperTerminal on Microsoft Windows. 

Select the appropriate COM port (to which the DB-9 end of the console cable is 
connected) and configure it for: 

 

38,400 bps 

 

8 data bits 

 

no parity 

 

1 stop bit 

 

no hardware flow control 

Press return and to bring up the Main menu.