Mocomtech CIM-550 Manuel D’Utilisation

CiM-550 IP Enabled Satellite Modem 

Rev. 2 

CiM IP Module Checkout & Fault Isolation 

CD/CIM550.IOM 

422 

Figure 14-1.  Main Menu 

To use this onterface, select the appropriate sub-menu or the entry by pressing the 
character indicated at the right. Enter x to return to the previous menu. 

The following sections in this guide assume that the CiM is still in factory default 
configuration for IP. If that’s not the case, the factory default configuration can be 
restored from the menu: 

From the Main Menu, select Administration sub-menu. 

From the Administration menu, select Operations and Maintenance sub-menu. 

From the Operations and Maintenance menu, select Database Operations sub-menu 

From the Database Operations menu, select Restore Factory Default option 

Confirm when prompted. 

 

This will erase any user configuration and restore the CiM to factory default 
configuration. 

CiM has 2 data interfaces - a LAN interface and a WAN interface. The LAN interface is 
a 10/100baseT Ethernet port (fei0). The WAN interface is the serial synchronous HDLC 
interface (hdl0). The Ethernet MAC address is factory assigned and cannot be changed.  

14.2.1.1 

 

S

ETTING 

IP A

DDRESS

(

ES

) 

From the Main Menu select Interface Configuration sub-menu. 

From the Interface Configuration Menu select Ethernet Interface (fei0) 

Set IP Address to 172.16.10.10 

Set Subnet Prefix Length to 24 

From the Interface Configuration Menu select Satellite/HDLC Interface (hdl0). 

Set IP Address to 10.1.1.1 

Set Subnet Prefix Length to 24 

Set RX – Enable/Disable and TX – Enable/Disable to Enable. 

From Receive HDLC Channel Address menu set HDLC Addr 1 to 1 (0x0001) 

The other parameters can be left to their factory default settings.